first 60/10 in Victoria at a PM

For general announcements, and anything which does not fit into one of the categories below.

Moderator: Mod

Ned
Posts: 90
Joined: Fri Mar 31, 2006 7:33 am

first 60/10 in Victoria at a PM

Post by Ned »

This weekend at Warracknabeal PM, F/Class open shooter Paul Mc Carthy shoot a 60/10 at 500 yds, I think this may be the first recorded 60/10 at a prize meeting in Victoria since the introduction of ICFRA targets. He was shooting a 6.mm dasher.

Ned
Ned
Posts: 90
Joined: Fri Mar 31, 2006 7:33 am

Post by Ned »

So out of 91 people who have read this thread in regards to this great achievement. Not one person has offered any form of congratulations on such a magnificent achievement. Well you should all have a good look at your selves, I am appalled at every one that has read this thread and not put forward a message of congratulations. I hope one day you all have a perfect shoot and get the same response as you have given this thread.

Ned
bruce moulds
Posts: 2900
Joined: Sun Jun 19, 2005 4:07 pm
Has thanked: 413 times
Been thanked: 330 times

Post by bruce moulds »

maybe the conditions were easy ned.
bruce moulds
"SUCH IS LIFE" Edward Kelly 11 nov 1880
http://youtu.be/YRaRCCZjdTM
AndyE
Posts: 7
Joined: Sun Jul 17, 2011 8:03 pm

Post by AndyE »

Well bloody done! Good shooting
John E
Posts: 1015
Joined: Thu Jun 30, 2005 2:14 pm
Location: Melbourne
Contact:

Post by John E »

Well done, Paul.
How did you go Ned? I haven't seen any results yet.
Have you got some lollies for me?

John
TOM
Posts: 381
Joined: Sat Jun 19, 2010 9:35 am

Post by TOM »

Are you having another bad week Ned?
BATattack
Posts: 1345
Joined: Mon Dec 29, 2008 10:29 pm
Has thanked: 92 times
Been thanked: 280 times

Post by BATattack »

congratulations!!! thats a fantastic acheivement! how bout some pics/specs of his rig and how hes got such a good load worked out?
agro
Posts: 347
Joined: Fri Jul 22, 2005 9:29 pm
Location: Regional Vic.
Been thanked: 10 times

first 60/10 in Victoria at a PM

Post by agro »

Excellent!!! Well done Paul. The wind fairies were on your side.
I wish I could have been there to see it too.
LEE .308
Posts: 60
Joined: Thu Dec 30, 2010 10:01 pm
Location: Hobart Tas
Contact:

Post by LEE .308 »

Well done Paul
Excellent shooting!
Lee O'Keefe
Secretary
Sandford Rifle Club
Tas
http://sandfordrifleclub.com.au/
stu_bear2002
Posts: 186
Joined: Fri Jun 16, 2006 10:01 pm
Location: Bribie Island QLD
Has thanked: 3 times
Been thanked: 1 time

Post by stu_bear2002 »

congratulations paul may it be the first of more to come :D
Stiller/holeshot .22LR
Bruno mod2(sleeved) .22LR
Rem7(sleeved) 6mmBR and 6mm Dasher
Stolle panda 6PPC
Winchester 101 12g
orangegrove
Posts: 37
Joined: Tue Aug 03, 2010 3:35 pm
Location: wimmera

Post by orangegrove »

We at the Warracknabeal club certainly congratulate Paul for his fantastic shoot. We are very proud that this happened on our range. Perhaps a few more would like to try to match Pauls score next July?
VickiMcc
Posts: 277
Joined: Fri Jun 17, 2005 8:05 pm

Post by VickiMcc »

I would like to thank all those people who posted such kind words. There was very nearly another possible at the same range on the same day by Gary Hunt, unfortunately not to be. Never the less still a fanyastic shoot, a 60.9



Paul
RDavies
Posts: 2336
Joined: Sun Feb 12, 2006 7:23 pm
Location: Singleton NSW
Has thanked: 715 times
Been thanked: 760 times

Post by RDavies »

If anyone was going to get a Sixty, Nine on a rifle range, it would be Garry Hunt. :wink:
terry sheedy
Posts: 36
Joined: Tue Sep 05, 2006 10:48 am
Location: perth
Been thanked: 2 times

60.10

Post by terry sheedy »

When will there be a 60.10 list on ozfclass?
Terry
Woody_rod
Posts: 862
Joined: Thu May 22, 2008 9:00 pm
Location: Woodanilling WA

Post by Woody_rod »

bruce moulds wrote:maybe the conditions were easy ned.
bruce moulds


Well done on the 60.10, is a relatively rare event.

Bruce, not many rifles will consistently shoot inside 0.5 MOA despite any amount of skill of the operator. Reality vs what people think their gear will do.
Post Reply Previous topicNext topic