Tru-Flite Barrel Block Stock

Post by **AlanF** » Fri May 25, 2012 5:43 pm

Have just been sent a picture of a new stock from Tru-Flite. Its made to fit Barnard Ps and squeezes into F-Open weight limits with a 32" parallel profile barrel and NF scope.
Not sure about price, but it'd be very nice for someone wanting to put something together quickly - would suit a 7mm or 30 cal for Raton!

<img src="http://www.ozfclass.com/forums/pic/TruFliteBarrelBlockStock.JPG">

Tman · Post by **Tman** » Sat May 26, 2012 12:31 pm

Very nice

_AJ · Post by **_AJ** » Tue May 29, 2012 6:14 pm

That colour scheme makes it one good-looking rifle. (Much nicer than the pink one on the True-Flite website - had to go looking for more info after seeing this post.)

westernsky · Post by **westernsky** » Sun Jun 03, 2012 10:30 am

that is a seriously good looking rifle!
if only it was easier to get more added to your licence!

flatlina · Post by **flatlina** » Sun Jun 03, 2012 1:07 pm

westernsky wrote:that is a seriously good looking rifle!
if only it was easier to get more added to your licence!

It is , just move to another State.

Regards
john

Left WA 37 years ago. Bolted my 5th safe in the other day.

Quick · Post by **Quick** » Sun Jun 03, 2012 3:18 pm

That is one good looking rifle. Any info on the stock pricing and whether they will offer for any other actions?

TOM · Post by **TOM** » Sun Jun 03, 2012 3:26 pm

They would probly do a flat top Quick, you can then inlet for whatever you wanted. Wouldn't be a budget build by the looks of that thing though.

Post by **AlanF** » Sun Jun 03, 2012 4:22 pm

TOM wrote:They would probly do a flat top Quick, you can then inlet for whatever you wanted. Wouldn't be a budget build by the looks of that thing though.

Its actually a barrel block stock, so just needs to cater for trigger and bolt handle position. I'll try to find out what the price is and whether they cater for other actions yet.

IanP · Post by **IanP** » Sun Jun 03, 2012 6:54 pm

AlanF wrote:
TOM wrote:They would probly do a flat top Quick, you can then inlet for whatever you wanted. Wouldn't be a budget build by the looks of that thing though.

Its actually a barrel block stock, so just needs to cater for trigger and bolt handle position. I'll try to find out what the price is and whether they cater for other actions yet.

Alan, are you lookin to upgrade from battleship grey to something a little more upmarket for Raton?

Ian

Post by **AlanF** » Sun Jun 03, 2012 8:36 pm

IanP wrote:...Alan, are you lookin to upgrade from battleship grey to something a little more upmarket for Raton?

Ian

Ian,

What's upmarket is in the eye of the beholder....

Alan

johnk · Post by **johnk** » Sun Jun 03, 2012 8:47 pm

Alan,

That's what Ian said.

John

Post by **AlanF** » Thu Jun 28, 2012 4:29 pm

Quick wrote:That is one good looking rifle. Any info on the stock pricing and whether they will offer for any other actions?

Price is NZ$1800. With the current exchange rate, plus GST I estimate total cost of about A$1620 + freight from NZ. So far they're only made to suit the Barnard P, which cost about A$1700, so with scope rail you'd be looking at a complete rifle for about $3500.

Alan

Quick · Post by **Quick** » Thu Jun 28, 2012 5:13 pm

Man, that's a tad out of my price range! But still very nice indeed.

Norm · Post by **Norm** » Thu Jun 28, 2012 5:36 pm

AlanF wrote:
Quick wrote:That is one good looking rifle. Any info on the stock pricing and whether they will offer for any other actions?

Price is NZ$1800. With the current exchange rate, plus GST I estimate total cost of about A$1620 + freight from NZ. So far they're only made to suit the Barnard P, which cost about A$1700, so with scope rail you'd be looking at a complete rifle for about $3500.

Alan

Does that price include a fitted barrel?

Post by **AlanF** » Thu Jun 28, 2012 6:00 pm

Norm wrote:
AlanF wrote:
Quick wrote:That is one good looking rifle. Any info on the stock pricing and whether they will offer for any other actions?

Price is NZ$1800. With the current exchange rate, plus GST I estimate total cost of about A$1620 + freight from NZ. So far they're only made to suit the Barnard P, which cost about A$1700, so with scope rail you'd be looking at a complete rifle for about $3500.

Alan

Does that price include a fitted barrel?

No it doesn't - my bad :oops:

.

I've just landed a True-flite barrel for $NZ673 ($A550) so add say A$250 for fitting, and that's $4300 total.

Regarding the price of the stock alone, I think its quite competitive for what you get.

Alan