Get or give advice on equipment, reloading and other technical issues.
Moderator: Mod
b3n0089
Posts: 5 Joined: Sun Jun 23, 2013 7:49 pm
Post
by b3n0089 » Mon Jun 24, 2013 3:39 pm
Will cases that close tight in the chamber affect my shot?
RAVEN
Posts: 1979 Joined: Sun Jun 19, 2005 9:37 pm
Location: Adelaide South Australia (CTV)
Has thanked: 97 times
Been thanked: 137 times
Post
by RAVEN » Mon Jun 24, 2013 7:06 pm
Not if they are all the same
you may want to consider shoulder bumping a few thou
the next level of this is they will become hard to extract
RB
b3n0089
Posts: 5 Joined: Sun Jun 23, 2013 7:49 pm
Post
by b3n0089 » Mon Jun 24, 2013 7:27 pm
Cheers, I've been having a few wild shot over the past few weeks, like going from a good group in the x and 6 to a high 4 or a low 5. These shots only seem to come on loads that are a little tight to close in the chamber. Going to try completely new brass and see if that will change it at all.
RAVEN
Posts: 1979 Joined: Sun Jun 19, 2005 9:37 pm
Location: Adelaide South Australia (CTV)
Has thanked: 97 times
Been thanked: 137 times
Post
by RAVEN » Mon Jun 24, 2013 8:05 pm
The key is uniformity with every single thing.
Good Luck
RB
b3n0089
Posts: 5 Joined: Sun Jun 23, 2013 7:49 pm
Post
by b3n0089 » Mon Jun 24, 2013 8:30 pm
Cheers for your advice mate
I've been shooting for a while but am only just getting into f class and am really enjoying it.