Omark adaptors

mitchellchandler_au · Post by **mitchellchandler_au** » Thu Aug 10, 2006 7:09 pm

Could any one please tell me if there is any one making adaptors for omarks these days.

Thanks

Lynn Otto · Post by **Lynn Otto** » Thu Aug 10, 2006 7:39 pm

Hi Mitchell

MAB make adapters for the Omark and should be available from the SARA shop

Lynn

mitchellchandler_au · Post by **mitchellchandler_au** » Mon Aug 14, 2006 5:15 pm

thanks for that

Ken L · Post by **Ken L** » Tue Aug 15, 2006 7:27 am

True flite also make an adaptor for the omark. These have a feature that the locking lugs are aprox 0.03 inch thicker and this allows the gunsmith to reface the locking lugs of the bolt head to match the new adaptor and set the camming action to give good extraction with a worn bolt handle and matching wear in the action .
The other point to consider with an adapptor is the position of the recoil lug as this may require the front hold down bolt to be repositioned.

Ken L

littlebang556 · Post by **littlebang556** » Tue Aug 15, 2006 9:46 am

I also had my old bolt head refaced to match up and my smith tells me I could do it one more time if needed but my adaptor is MAB.
Have seen a Maddco adaptor also I think.

Regards

Rob Alman

Sam Walker · Post by **Sam Walker** » Wed Aug 16, 2006 7:31 am

Does anybody know what thread is used for the barrel to screw into the MAB adaptors ?
Sam