Recoil reducers?

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Tim N
Posts: 1341
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW
Has thanked: 102 times
Been thanked: 511 times

Recoil reducers?

Post by Tim N »

Hi All,
Now these things have been around for a while does anyone have any recommendations as to which is best or if they make any difference at all?
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC
cheech
Posts: 408
Joined: Wed Jul 15, 2009 11:10 pm
Has thanked: 224 times
Been thanked: 105 times

Re: Recoil reducers?

Post by cheech »

Interesting topic,
I shoot FTR so this would be good for heavy 200 gn plus bullets . Have seen the ones that are integrated into the stock, would need to be careful not to gain too much weight , alter rifle balance , of course it would play with overall harmonics so a bit to consider but possible .

:D
saum2
Posts: 1119
Joined: Fri Jun 13, 2008 12:22 am
Has thanked: 11 times
Been thanked: 111 times

Re: Recoil reducers?

Post by saum2 »

Gday Tim,
I have 2x mercury in my SAUM, I think they help. Another SAUM shooter has an adjustable hydraulic butt plate fitted to his SAUM, shoots like a 6mm. Imported from USA, expensive but it works, single piston job, google is your friend.
Geoff
Tim N
Posts: 1341
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW
Has thanked: 102 times
Been thanked: 511 times

Re: Recoil reducers?

Post by Tim N »

Hey Geoff,
These are the ones I'm interested in, if they did reduce recoil considerably I reckon they would be worth the dollars
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC
saum2
Posts: 1119
Joined: Fri Jun 13, 2008 12:22 am
Has thanked: 11 times
Been thanked: 111 times

Re: Recoil reducers?

Post by saum2 »

Yeah Tim,
Just talking to him about it, he reckons it cuts down recoil a lot but for $400 he thinks it would be better if it cut recoil a lot more with SAUM. It's set to the max but needs more in his opinion.
Norm
Posts: 837
Joined: Fri Jul 23, 2010 10:21 pm
Location: Gippsland, Victoria
Has thanked: 6 times
Been thanked: 11 times

Re: Recoil reducers?

Post by Norm »

I have 2 of these things for sale if you want them Tim.

Make me an offer I can't refuse... :wink:
Tim N
Posts: 1341
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW
Has thanked: 102 times
Been thanked: 511 times

Re: Recoil reducers?

Post by Tim N »

Hi Norm
I'm guessing if you're selling them they haven't impressed you too much?
T3 do a better job?
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC
Norm
Posts: 837
Joined: Fri Jul 23, 2010 10:21 pm
Location: Gippsland, Victoria
Has thanked: 6 times
Been thanked: 11 times

Re: Recoil reducers?

Post by Norm »

Tim N wrote:Hi Norm
I'm guessing if you're selling them they haven't impressed you too much?
T3 do a better job?

Tim my rifle was over 1kg under weight so I removed them and hollowed the stock out more to load it up with lead.
mike H
Posts: 630
Joined: Mon May 08, 2006 5:34 pm
Location: JUNEE NSW
Has thanked: 40 times
Been thanked: 108 times

Re: Recoil reducers?

Post by mike H »

These SAUM'S must be something shocking,you are trying to convince us that a rifle weighing 1.75 kg's more than a FTR rifle is too much to handle,I shot FTR with well loaded 185 grain projectiles for a long time with no trouble,this was holding the rifle into the shoulder,now I have another rifle and shoot free recoil with 200 and 215 grain projectiles.I don't think that I am some superman,but free recoil doesn't hurt,nor did a firm hold.I very much doubt that some expensive gizmo is going to help.
BATattack
Posts: 1345
Joined: Mon Dec 29, 2008 10:29 pm
Has thanked: 92 times
Been thanked: 280 times

Re: Recoil reducers?

Post by BATattack »

Felt recoil withe the saum is about the same as an ftr rifle running 215s.
Tim N
Posts: 1341
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW
Has thanked: 102 times
Been thanked: 511 times

Re: Recoil reducers?

Post by Tim N »

mike H wrote:These SAUM'S must be something shocking,you are trying to convince us that a rifle weighing 1.75 kg's more than a FTR rifle is too much to handle,I shot FTR with well loaded 185 grain projectiles for a long time with no trouble,this was holding the rifle into the shoulder,now I have another rifle and shoot free recoil with 200 and 215 grain projectiles.I don't think that I am some superman,but free recoil doesn't hurt,nor did a firm hold.I very much doubt that some expensive gizmo is going to help.


We must be a little more refined than the barbarians shooting FTR :mrgreen:
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC
lonerider43
Posts: 430
Joined: Thu Sep 01, 2016 6:55 pm
Has thanked: 149 times
Been thanked: 62 times

Re: Recoil reducers?

Post by lonerider43 »

it all comes down to personal choice. :wink:
Australian's Against "Gun-A-Phobia"
Cliff Austen
Posts: 181
Joined: Wed Jul 06, 2005 11:18 am
Location: Sydney NSW Australia
Has thanked: 199 times
Been thanked: 99 times

Re: Recoil reducers?

Post by Cliff Austen »

Come on Tim, toughen up. Mike H is on the money.
Cheers
Cliff
Tim N
Posts: 1341
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW
Has thanked: 102 times
Been thanked: 511 times

Re: Recoil reducers?

Post by Tim N »

Cliff,
Mike could be a double for Grizzly Adams(a rough tough outdoors type for those of you under 50).
Probably wouldn't use a muzzle brake on a 50 cal :shock:
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC
johnk
Posts: 2211
Joined: Sun Sep 07, 2008 7:55 pm
Location: Brisbane
Has thanked: 71 times
Been thanked: 92 times

Re: Recoil reducers?

Post by johnk »

He mightn't be that but he has to be closest to the oldest active competitive shooter about.
Post Reply Previous topicNext topic