Farley issue

Tim N · Post by **Tim N** » Wed Sep 11, 2019 12:20 pm

Hi All
My Farley isn’t working as it should.
I’m guessing the plates are worn and need replacing?
BRT site states Farley are not in production??
I couldn’t upload the vid but what it’s doing is canting left and right as it’s moved up and down?
Any thoughts

ajvanwyk · Post by **ajvanwyk** » Wed Sep 11, 2019 12:38 pm

I've had this issue when I still had one. It was a easy fix and I'll give you a call to see if I can help

Jakec27 · Post by **Jakec27** » Wed Sep 11, 2019 5:15 pm

I’ll take it off your hands if you like :lol:

RJNEILSEN · Post by **RJNEILSEN** » Wed Sep 11, 2019 7:10 pm

definitely sounds knackered. I'll give you $50 for it. [-o<

jasmay · Post by **jasmay** » Wed Sep 11, 2019 8:04 pm

Biggest problem with your Farley is you don’t have a NEO.... next :lol:

michaeljp · Post by **michaeljp** » Wed Sep 11, 2019 9:19 pm

jasmay wrote:Biggest problem with your Farley is you don’t have a NEO.... next

Jasmay, i think everyone would own a SEB of some sort if there wasn't a 2 year wait.

Tim N · Post by **Tim N** » Wed Sep 11, 2019 10:15 pm

This really is the place to turn to in times of trouble.

A bit of sarcasm mixed in with some circling vultures.
With friends like these who needs enemies.

I’ll contact you soon Albert

Ratgun · Post by **Ratgun** » Thu Sep 12, 2019 6:35 pm

Is there an easy fix. Having trouble adjusting mine

Longranger · Post by **Longranger** » Thu Sep 12, 2019 7:27 pm

These are an excellent Farley substitute....

https://www.varidecicognani.it/en/produ ... _head.html

Tim N · Post by **Tim N** » Fri Sep 13, 2019 9:24 pm

Apparently the Farley tension screws need to be set correctly so the head travels up and down level.
Some “tuning” needed

BATattack · Post by **BATattack** » Fri Sep 13, 2019 11:45 pm

Gotta have both friction screws adjusted evenly.

6.5x55ai · Post by **6.5x55ai** » Mon Sep 23, 2019 2:44 pm

Tim N wrote:Hi All
My Farley isn’t working as it should.
I’m guessing the plates are worn and need replacing?
BRT site states Farley are not in production??
I couldn’t upload the vid but what it’s doing is canting left and right as it’s moved up and down?
Any thoughts

A mate has just returned from the US. Whilst he was there he visited Farley and bought spares for his rest. They have all the old parts and had new rests shipping out. Very much still making rests and unfortunately still very much not answering messages.
Not answering messages is the self same same experience I had several years ago so gave up on them back then.

michaeljp · Post by **michaeljp** » Mon Sep 23, 2019 4:45 pm

If its a tension screw issue, contact Butch Lambert of Shadetree rests. he sells tension screws to suit.

Tim N · Post by **Tim N** » Tue Sep 24, 2019 6:40 pm

michaeljp wrote:If its a tension screw issue, contact Butch Lambert of Shadetree rests. he sells tension screws to suit.

Thanks for the tip, I upgraded the tension feet a while ago.
I’ve adjusted the tension screws and I think it’s right...

Farley issue

Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue

Re: Farley issue