Transferring Firearms Dealer Name & Licence #: Suffolk sports Lismore
Seller Firearms Licence #: 412002328
Firearm Serial #: S19-036
Hi performing .308 competition rifle , FTR, F std, Fly rifle. Action is a Barnard S Right bolt right port non eject, High Gloss and finish Demar Walnut stock sitting in a Barnard v block comes with three barrels
Barrel one is a Bartlein 1:10 threaded for a Dan brambly tuner under 1000 rounds free bore for 180-200 gr projectiles DBG.
Barrel two Brux !:10 free bore for 180-200 gr projectiles approx 1350 rounds LRP.
Barrel three Madco 1:11 fee bore 180 gr projectiles approx 1000 rounds DBG.
Comes with hard TO GET Genuine Barnard S barrel spanner/ wrench to change barrels out.
Trigger is a Flavio /SDhE set at 4 OZ probably the best trigger I have used.
All barrels come with Lapua Palma brass fire formed in each barrel.
All barrels are very accurate and cleaned / oiled after each shoot and have a lot of life left in them.
Comes with approx. 350 Berger 180 Gr juggernaut,s.
Gun was smithed by LRP.
Finished by Gold Coast Two pack.
Complete package of best quality built competition rifle with plenty of extras to get you started.
$ 7,780 PPH
Best to Phone Me on 0419443196 Please don't leave a message here.
Barnard .308
Moderator: Mod
Forum rules
Please note the following:
Advertising of Firearms and/or Firearm PARTS
Part 6 > Section 54 of the Firearms Act 1996 (NSW) deals with the advertising of Firearms and Firearm PARTS in NSW. After a detailed reading of this Section, I have decided to continue to allow the advertising of firearms. However, I have to insist on the following details being provided in the post:
The following is REQUIRED for Advertising of Firearms
1) The dealer's name and dealer licence number through whom the transfer will be arranged.
2) The firearms licence number of the seller.
3) The serial number of the firearm.
Advertising of Firearm PARTS
Where a part does not require a Dealer Transfer and/or does not have a serial number, items 1 and/or 3 can be removed.
All Firearm and Firearm Parts for sale must include item 2) The firearms licence number of the seller.
If the above 3 items are not included in the post where required, the advertisement will be deleted without warning.
The 3 required items will be pre-defined in the topic post, you simply need to add the details as required or delete non required items for parts only.
Dealers
Advertising of goods for sale in commercial quantities or as a firearms dealer is not permitted.
For further details please read Rules for Advertising Firearms & PARTS
.
Please note the following:
Advertising of Firearms and/or Firearm PARTS
Part 6 > Section 54 of the Firearms Act 1996 (NSW) deals with the advertising of Firearms and Firearm PARTS in NSW. After a detailed reading of this Section, I have decided to continue to allow the advertising of firearms. However, I have to insist on the following details being provided in the post:
The following is REQUIRED for Advertising of Firearms
1) The dealer's name and dealer licence number through whom the transfer will be arranged.
2) The firearms licence number of the seller.
3) The serial number of the firearm.
Advertising of Firearm PARTS
Where a part does not require a Dealer Transfer and/or does not have a serial number, items 1 and/or 3 can be removed.
All Firearm and Firearm Parts for sale must include item 2) The firearms licence number of the seller.
If the above 3 items are not included in the post where required, the advertisement will be deleted without warning.
The 3 required items will be pre-defined in the topic post, you simply need to add the details as required or delete non required items for parts only.
Dealers
Advertising of goods for sale in commercial quantities or as a firearms dealer is not permitted.
For further details please read Rules for Advertising Firearms & PARTS
.
Menu
Newest members