Fclass scope choice

[John23]

Hi

I am looking for a upgrade to my optics and have a few considerations.

I do not have a huge budget and the scopes I am considering are:

Nightforce BR 12-42

Sightron s3 10-50

Burris XTR2 8-40

Price wise the sightron wins and in terms of features the burris takes the cake . This leaves me guessing that the NF wins in quality.

I have my concerns with all the listed scopes.

Sightron: 50moa being on the limited side. Poor warranty support if it fails.

Nightforce : 40 MOA !! Is this enough? I do not like the idea that this scope may be put to its limits when shooting LR and also load testing at 100m

Burris : 70MOA yep ! features YEP ! But these guys are new to this type of scope and I have my doubts that the quality is going to please my expectations. Based on the limited reviews I am a little worried about dropping $1300 od to be a gunnie pig.


I have owned a sightron s3 8-32 in the past and liked it.
And I am kind of leaning this way,

What do you guys think?

Any other ideas that wont break the bank?

Cheers

JH

[OuttaAmmo]

What was wrong with your previous sightron?

[John23]

Nothing it served well. I just sold it some time back.

I just have heard some horror stories

JH

[DannyS]

Plus 1 for the Sightron. I had an issue with a series 2 and it was repaired free of charge, just posted it to Sightron in the US.

Cheers
Danny

[John23]

Was that one purchased from the US Danny?

As that is probably how I will go

JH

[OuttaAmmo]

I vote you should be the guinea pig! Lmao
I read somewhere that burris and Steiner owned by the same company and share a lot of the same looks/features in some models. Steiner seem to have a good reputation.

[DannyS]

Hi John, I have purchased 5 sightrons from the US over the years, a series 1, a series 2 and three series 3 ( 6-24, 8-32 and a10-50).

Only one I had an issue with was the series 2, which I loaned to someone for a while, when I got it back it was faulty but it was repaired at no charge.

Cheers
Danny

[macguru]

I have 2 sightron 8-32 scopes with 1/8 clicks. they are all the scope you need to compete. I can buy 4 of them for the price of a march, but that is what i would buy if money was no object.

The bottom line is , you need 1/8 clicks (well i like that), you need at least 30 power. ED glass would be good under some conditions ... hence the march is good. Not sure if there is anything else i would spend money on. Of course nightforce are good but if i spent alot it would be a march for sure...

[smlekid]

although it isn't on your list I can't complain about my Vortex Vipers been very good scopes so far

[John23]

although it isn't on your list I can't complain about my Vortex Vipers been very good scopes so far

I currently have a vortex viper PST now and that is what I will be selling to fund the new scope.
The PST is good , its tracks perfect, has lots of features such as zero stop and illumination.

What I dont like is the glass. It gets a little cloudy on max power and tends to annoy me a little. This seems to be the common thing with these scopes. Also the 24x is just not enough for me.


JH

[John23]

I vote you should be the guinea pig! Lmao
I read somewhere that burris and Steiner owned by the same company and share a lot of the same looks/features in some models. Steiner seem to have a good reputation.

For those who have not seen this scope yet.

70MOA of elevation.
34mm tube
Illuminated reticle
Front focal plane reticle
Reticle has 0.5moa subtensions , the only other scope that has this is the March right?

$1200 US give or take....

Seems like a lot of good features. Seems like almost too many good features for the price?
This is what causes my worry.


Thats what I liked my Sightron. It was simple and elegant.
It did what it was meant to and nothing more.

The Sightron is a compromise in terms of reticle choice.
I previously has the MOA2 this had 2MOA subtensions indexed at 20x.
On 32x it was just over 1MOA.
This I still found too course to accurately use. And why the Burris appeals.
If I consider the 1/4 click open turret sightron S3 I could choose the MOA2 again which is still indexed at 20x.
On 50x im guessing each subtension would be closer to 0.5MOA?

Or otherwise I will get the fine cross hair or target dot and use the rings on the target or start to dial wind.


One thing I am certain of is I hate being poor when it comes to buying scopes.
I know what want.
But unfortunately the perfect scope either dose not exist or is out of my budget.....



No people pushing the NF???
I am surprised !
The 40MOA of adjustment is not enough?

JH

[ned kelly]

G'day All,
NF BR12-42 NP-2DD works for me, I've had two (sold the 8-32 to buy the 12-42) both great, reliable and I use mine out to 1000 with a 6x47 Lapua.
I'd buy another if I could afford it. FYI, I do own a March 40x52 as well but the NF get the job done with my full confidence in it.
I like the DD reticle as I've found as a aiming off shooter that the spotter usually ends up very close to the inner end of the horizontal stadia bars so I plonk the end (with minor hold off) where I want the bullet to go and let it rip. Works for me!

Cheerio Ned

[Longranger]

You can get 1/8 moa adjustments with Sightrons as a special order. I went this way with an S3 10-50x60 with the LRMOA reticle which has 1/4 moa turrets as standard.

From memory it was an extra $150.00.

[BATattack]

Nightforce with NPR - 2 reticle. Best reliable good optics bang for bucks going I recon.

The only downfall in them is they are heavier than some.

[Peterla]

+1 for night force NPR-2 I have three of them and really happy with them