308 loads for 155.5 bergers

Lucas superv · Post by **Lucas superv** » Tue Sep 30, 2014 8:38 pm

Just wondering what loads people are running and what sort of velocity they are geting

shooter mcreid · Post by **shooter mcreid** » Tue Sep 30, 2014 11:01 pm

46.0 of 2208 gives me 3000 to 3010fps out of a 28" barrel

plumbs7 · Post by **plumbs7** » Wed Oct 01, 2014 6:25 am

46.2 to 46.4 of 2208 depending on the weather temp. Small rifle primer gives about 2980 Fps 28" barrel. Regards Graham Sells.

higginsdj · Post by **higginsdj** » Wed Oct 01, 2014 6:57 am

46.5 2208 Lapua Palma CCI BR4 2970-3050 out of a 30" barrel

Quick · Post by **Quick** » Wed Oct 01, 2014 1:03 pm

46gr 2208 in Palma brass, CCI 450. Berger seated at 10-15thou off lands gives 2880 in 26" barrel.

Lucas superv · Post by **Lucas superv** » Wed Oct 01, 2014 3:39 pm

I'm running 43.7of 06h 10though in the lands but un shore of speed
As I don't own a crono

Post by **GrahamW** » Wed Oct 01, 2014 7:54 pm

2208 @ 46.8, WIN cases, Madco 30" #7, jammed 5 to 10 thou. get around 3000fps.

8-)

Pete · Post by **Pete** » Thu Oct 02, 2014 10:45 am

47gn of 2208 in LAPUA cases CCI BR-2 primers and projectile jammed is FAR TOO HOT in my rifle. ADI list it as a max load for 155 GR. SIE HPBT. but for WINCHESTER cases. Zero sticky extraction issues after firing and even the primers didn't appear to be overly flat..............Primer pockets trashed though from brand new after first firing (measurably so), shows just how much difference case brand can make when your at or near the very end of the pressure curve. Lesson learnt! :oops:

308 loads for 155.5 bergers

308 loads for 155.5 bergers

Re: 308 loads for 155.5 bergers

Re: 308 loads for 155.5 bergers

Re: 308 loads for 155.5 bergers

Re: 308 loads for 155.5 bergers

Re: 308 loads for 155.5 bergers

Re: 308 loads for 155.5 bergers

Re: 308 loads for 155.5 bergers