The trigger on my Omark is not very nice so i am considering replacing it with a Davies, which I have heard are excellent. My Omark looks like one of...
Last post
got to say I had a F class 2 stage trigger fitted to my Omark all I can say is WOW what a fantastic trigger
Hi all
Up until recently I have been running cci 450s in both my 223 and 308 for FS with pretty good results, this past weekend I shot a 60.5 at...
Last post
Got a chance to give both the 223 and 308 barrels a run over 5 ranges at Campbell town today the both held x ring elevation over every range with the...
After today's Anzac day prize meet down at Anzac range, I came up with some issues and I wish to understand what is going on. Here is what happened:...
Last post
I finally got the chance for a shoot today. I set up the scope as mentioned in the article between the morning and the afternoon shoots in malabar....
Can the members provide me a list of suppliers in Aust. for Remington clone actions - single shot left hand short action with .062 firing pin hole?...
Last post
Update on bushing my Rem700 .223 - received my bolt back from Keith Hills within one and a half weeks. My brother in law shot it last Saturday in our...
Given the current muzzle energy restriction in Qld I thought it timely to compare the highest BC Bullets for both calibres. The normal comparison for...
Last post
Thanks Ian. I'm setting off early tomorrow for a delightful drive through the mountains to deliver all my stuff to Mark Sewell for his skillful...
Hi guys and girls. Getting back in to F Standard after a 2 year hiatus. I have been to a couple of club matches and was at the Kapunda prize meet on...
Last post
Thanks guys. I double checked after I posted and found that section in the rules. I must have been reading through something else. Cheers for...
Looks like all our clubs will be given some new software from the NRAA to enable tabulating of rankings based on more than simply State Championship,...
Last post
Hi Ian,
I saw this software used at the Tasi queens and it looked OK
The big surprise to me was the results were available online very quickly....
Been shooting F Class for a few years. I'm keen to shoot Optical Class with a new target rifle I've put together in .308. Can the members give me...
Last post
Kerod Lindley tried to get Optical class accepted at the QRA Queens for a decade or more, offering extraordinarily generous sponsorship. At its best,...
These are short videos of some well known shooters at Belmont for Queens. Some might find it interesting to observe the different styles and obvious...
We all know that the upcoming Canadian F-Class World Championships has seen fit to include range restrictions. They have also provided a spreadsheet...
Last post
From what I am hearing from some shooters in other states (eastern) it would appear that future range restrictions may be applied to them.
Anyone want to comment on the best way to keep a Barnard (Mod P) trigger in top condition?
I set mine up for two stage, (short first stage) action...
Last post
I'm glad I'm not the only one who thinks a film of lubricant on the trigger is the way to go! I would never have thought of using two stroke fuel as...
After todays efforts Im at the end of my tether with this 7mm barrel. Have tried everything I can think of. This last load looked worth further work...
Last post
Matt- still the factory pin spring approx 1600 rounds old. Dont have any issue with the other 6.5mm barrel.
I now have my new F class open rifle back from the gunsmith the action is an Omark fitted with an adapter a 1 in 8 twist Light Varmit Kreiger barrel...
Last post
Looks great.
Jerome knows how to put together a rifle.
He is putting together a 22BR rifle for me.
Cheers
Paul
For a 284 or 284 shehane what neck size reamer should I be looking for? I noticed on the SA F Class interview with Bill Shehane that he recommends a...
Last post
Un turned brass loaded is about .313 and most reamers tend to be that size so turning is needed. Mine is .318 but I havent had any joy out of this...
I have never used a tumbler with media, or an ultrasonic cleaner, or any other means of cleaning the inside of cases (apart from brushing the inside...
Last post
For 900/1000 yard shooting I use newly fireformed brass (2nd firing or 3rd firing. If in absence of this I will clean inside/outside the cases with...
Hi all I hope to have my new F Open set up in my hands next week just curious on what people are doing to run in there new barrels I was thinking of...
Last post
smle,
you too notice the pleasantness to shoot of this round!
your running in load was a good one. better a bit on the light side.
I am starting...
I'm looking at building a .223 for my girlfriend to shoot (and maybe something bigger down the track) and I'm thinking the S may feed the .223 better...
Last post
Adam, if your not running heavy barrels then the Model P with a heavy palma or heavy varmint would make weight so long as you use a modern light...
The following link is to an old 2010 discussion on the 6mmbr /accurate shooter forums with a quite detailed discussion on the technical merits of the...
Last post
Brad...definitely not.
I am still learning to drive a straight 284 Win properly, and I just cant help thinking that if Marty Lobert can be...
The last time I shot with my Savage, I had a 0.5 inch groups from 100 yards. Then I had this issue of very light trigger and had to remove the barrel...
Last post
Sorry, should have mentioned, 5 shot groups.
But then again, they were all untested loads, 44gr of 2206H. My tested load is 44.5gr of 2208, for...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Menu
Newest members