Hi everyone,
I shoot up in Ravenshoe, some here may know me and my missus Betta (the new NQRA secretary). I have shot standard for a while and have...
Last post
Dee Cee, one of a series of test barrels used with factory ammunition in a 1-14 twist, assuming this setup was similar to yours performed best at 29...
Hi All
Found this round recently, claims to put a 180gn out at 3100fps
Dies etc are available
Thought it might be of interest to someone just google...
Last post
Tim, when I first got my 7mm SAUM going, I found that my upper loads were running at 3100 fps with about 65gn's 2217. I soon backed that off as the...
Those who know me know my back is stuffed and I shoot off a bench which I hate. I have a letter from my doctor to shoot on the bench as 2 discs in my...
Last post
My bench is quite stable, but I have yet to see a bench that gently resting your arm on it does not move the cross hairs around half a minute. On a...
Regarding the information that David's generously sharing with us through multiple threads about barrel compensation, I'm left with some thoughts......
Last post
Denis,
You are not foolish, there is just so much to digest in writing, rather than hands on. It’s a bit like trying to find the counter rotations...
It's a dangerous occupation, but I'm thinking.
I ran a 243 and a 223 hunter. The 223 sings with Sierra 55gn soft points, which have a flat base, and...
I have a Lee priming tool at the moment, the newer style with the square trays, which is fine if you can forgive the lid clips which don't even last...
I have a Wilbern action with single stage trigger. The trigger requires adjustment to comply with F Class Std rules. It tested under the 1 kg at the...
Sorry, not exactly an F/FTR/TR topic. Where can I source 22RF tuners in Oz? I know I should be asking this on RF forum but will have a go here first....
Last post
The SIA tuner I got is actually for 308 target rifles and has a section where the front sight can be installed on it. I simply got a machinist to...
After a very long wait 7 months I got my batch of 2000 80g for my 223s
I have been using these for 3 years now and had good success
On looking at...
Last post
Hi Brad
Yes I agree my main concern is the larger metplat as this effects BC
I will batch all 2000 on bearing length and weight and hopefully find a...
Just wandering as a rule if thumb ! How much extreme spread is tolerable ?
Also if you have excessive extreme spread is the round under charged , eg...
Last post
I've upped the load to 46.5 and dropped the s/d from 13 to 7 and now 2990 Fps . I think 46.6 will be on the money! I think the barrel is wearing in...
I have been out of the F-Class game for a little while and keen to get back in. I am looking to get a setup that can be used mostly for F-Class, but...
Last post
I built a F standard gun on an Omark action before I had any real knowledge about the sport and what it takes to be up there with the best. Time over...
I need to make a decision, 2 barrels on the way do I chamber for 284 or go SAUM. From all the reading it would seem the SAUM is the way to go, but if...
Last post
I will probably try and build a 7 saum on a savage target action.
I have purchased another action and i am lining up a magnum boltface now,
savage...
At the weekly range shoot on Saturday my jewel trigger failed whilst my daughter was shooting the 6dasher.
The trigger seemed to loose is...
Last post
Yes I've had that with a laarge cal of mine (300 rum 98 gr of 50 mbg powder ) it was blowing primers because of another issue ! Every time it blew a...
Hoping someone can confirm I've got this right. If I've got a close range wind zero will I need to put on about 3/4 of a minute left for 1000yds in...
Last post
Thanks all and yes Dave I'm comfortable enough with coriolis. My initial query was to confirm my hand calculations of the spin drift and - as happens...
Has anyone done experimenting and has good or bad results in metplating bullets. Or are the bullets these days are off good quality.And am i wasting...
Hi all. New member here. Please forgive me for the dumb question here in this space. 7X284 project to neck turn or no neck turn this is the question...
Do any ozfclass members have experience using the QUICKLOAD interior and exterior ballistics Programme sold by Neconos in the US, that they would be...
Last post
Ron,
Got your spec's. Are you well insured :mrgreen: ??
PM me your email address so that I can email you the "outcome of entering your...
Attempted my first batch of moly coating on my own tonight. Placed about 100 HBC .308 into the plastic container with about a quarter of a teaspoon...
Last post
I used molyed projectiles in a .223 barrel from new (Running in as well) the barrel was a tack driver.
First serious shoot on a target was a 50.8 in...
Hey guys I need a ruling on a front bi pod mat. How think and how should it be designed.
Last post
The major difference is that the F/TR bipod itself can have spikes which can be pressed into the ground up to 50mm. Other than that it's pretty much...
Does anybody in NSW, near Sydney have a scale to weigh their rifles? What brand is it and where to get it? Can I borrow/use it once?
My...
Last post
When I get 2 different readings in 2 different days, I will start looking at getting a second opinion and that is what I was aiming to do. I did not...
I recently sent a PM to David (Willada) regarding how he looks at tuning a rifle by applying the experiences he has been constantly sharing with us....
Last post
Aaron there is a relatively small percentage of people out there who would look at this. Back in the 1980's when buttoning some barrels the bloke I...
The 10 shot groups are not tight because they came from the machine rest. What is important is they are...
Last post
Belmont range at 300 yards in August during the Queens can cause shooters to doubt their zeros. There's a combination there of a very flat mound (it...
I have 300 once fired .308 Winchester Palma brass that I am about to reload . I shoot target rifle with an Omark action. What weight batches do other...
Last post
45 grains is what my Dad loaded my bullets. However 3 weeks ago I went to Perth for the weekend . Swanbourne was shooting 1000 yds that day so I made...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
Menu
Newest members